DLG-1000
DLG-1000
3.Elevator Wire length 90MM, 3.7G
Servo and accessories.
4.Insert and screw the servo into the slot
on fuselage by screwdriver.
5.Elevator tail pushrod
6.Cross the pushrod into carbon tail rod and install it on the adjuster and elevator
servo horn, then fixed with screw, and make sure to keep the rudder in the same
horizontal line.
7.Elevator Wire Length 80MM,3.7g servo and
accessories
8.Put the servo into the slot on fuselage,and fixed with screw.
9.Rudder pushrod
10.Cross the pushrod into carbon tail rod of fuselage and install it on the adjuster
and rudder servo horn, then fixed with screw,and make sure to keep the rudder
in the same horizontal line.
11.Aileron servo wire length 330mm, 3.7g
servo and accessories
12.Screw the left and right servo arm
by screwdriver
Summary of Contents for DLG-1000
Page 1: ......
Page 8: ...DLG 1000 DLG 1000 ...