background image

11. Fix the equipment canopy on the equipment cabin 
      with clip. 

The following 12-20 are the installation steps
                    of FPV Kraftei version.

12. Put the cowl into the corresponding slot of plane 
       body, then glue it well.

13.  Insert the motor mount B into the corresponding 
       slot, then fix it with glue.

14. Insert the rear screw of motor into the corresponding
      big hole of motor mount, then clamp and rotate the 
      motor with a tool along the direction of arrow, make 
      sure rotate it in place.

15. Put the ESC into the fuselage and connect with the
      motor well.

16. Fix the 5045 propeller on the motor with screw.

17. Insert the servo wire and ESC signal line into the 
      corresponding slot of receiver, fix the receiver on 
      the side wall of equipment cabin with 3M double 
      side tape.

18. Put the battery into the equipment cabin, then fix it
       with battery velcro. 

20. Fix the FPV equipment platform on the equipment 
       cabin through clip.

Safety is the first rule for any kind of flying. Third party insurance should be considered as a 
basic essential. If you join a model club they usually have an insurance scheme as part of the 
membership fee.

It is your personal responsibility to ensure you have adequate insurance. Make it your priority 
to keep your models and radio control system in perfect order at all times. Check the correct 
charging procedure for the batteries you are using. Make sure of all sensible safety systems 
and precautions which are advised for your system. 

Always fly with a responsible attitude. Please don’t fly your models dangerously, it is not wise to 
fly near people or over their heads. Be SMART, fly SAFE. Always fly in such a way that you do 
not endanger yourself or others. 

Bear in mind that even the best RC system in the world is subject to outside interference. No 
matter how many years of accident free flying you have under your belt, things can go wrong at 
any time and in a matter of seconds. We hope you have many hours of pleasure building and 
flying your new model.

FPV Kraftei 650

19. Install the camera, image transmission and flying 
      control on the FPV equipment platform.

Summary of Contents for FPV Kraftei 650 EPO






Reviews: