33
due to a random security code assigned by the transmitter at start-up. This code must be
received and stored by the weather station in the first 3 minutes of power being supplied to
the transmitter.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum
accuracy of these units.
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
SETTING UP
1.
First, insert the batteries in the transmitter
(see “
To install and replace batteries in
the thermo-hygro transmitter
”
above).
2.
Within 2 minutes of powering up the transmitter, insert the batteries in the weather
station (see “
To install and replace batteries in the weather station
”
above). Once
the batteries are in place, all segments of the LCD will light up briefly. Following the
indoor temperature/humidity and the time as 00:00 will be displayed. If this information
is not displayed on the LCD after 60 seconds, remove the batteries and wait for at least
60 seconds before reinserting them. Once the indoor data is displayed user may
proceed to the next step.
3.
After the batteries are inserted, the weather station will start receiving data signal from
the transmitter. The outdoor temperature and humidity data should then be displayed
on the weather station. If this does not happen after 2 minutes, the batteries will need
