Feel good through warmth from electricity - www.technotherm.de
Instruction Manual - PH Slimline
Feel good through warmth from electricity - www.technotherm.de
GB
4|
MODES OF OPERATION
How to change the working mode?
•
Use the navigation key right ( ) (in some models also you can
use the key left ) or to display the working mode line.
•
Move the frame cursor on the desired working mode and press (OK)
to enter in the operating mode you have chosen.
• MANUAL MODE COMFORT
Manual working mode, the comfort temperature setting will be followed 24 hours a day / 7 days
a week. By pressing (-) or (+) keys, the temperature can be adjusted accordingly.
• MANUAL MODE REDUCED
During manual working mode the reduced temperature setting will be followed 24 hours a day
/ 7 days a week. By pressing (-) or (+) keys, the temperature starts to blink and can be adjusted.
• OFF MODE
This mode only is selectable on radiators without an On/Off button. On radiators with an On/Off
button, press this key to turn Off.
Use this mode if you need to switch off your installation.
Be careful: in this mode your radiator can freeze.
• AUTOMATIC MODE
With this mode the thermostat will follow the chosen program (Built-in or customised) accor
ding to the actual time and the Comfort and Reduced temperature settings.
You can easily override the current program temperature by changing the value with (-) or (+).
The current settingntemperature will blink.
The small hand logo will be displayed when the override function is active. The original
temperature settings will eturn when the timer reaches the next change in the programme.
If hand logo blinks then ITCS is active (See the user menu for more explanation on this
function).
• ANTIFREEZE MODE
Use this mode if you want to protect your radiator against freezing when going on holiday...
The anti-freeze setting temperature is fixed and can be adjusted in the parameter menu number
05 ‘AF’, see chapter 6. (Default value 5°C)
If you want to stop the timer function before the end, set the duration period to “no” with (-) key.
• TIMER MODE
The Timer mode allows you to adjust the temperature and the duration for a specific time.
- This function can be used when you stay at home for several days, or if you want to override
the program or some time.
- You can first adjust the duration in hours “H” if below 24H, then in days “d” with (-) or (+),
press (OK) to confirm. (Adjustable from 1 hour up to 44 days)
- You can also adjust the desired setting temperature to start the function. (Default value 21°C).
The logo will blink and the number of hours /days remaining is displayed until the end of the period.
