3
Edition:01/14
Manual
CPH 1000 - 2400
2.1 Technical data
Model
Power [W]
Dimensions (ill.)
a [mm] b [mm] weight [kg]
CPH 1000
1000
415
215
4,8
CPH 1500
1500
565
365
6,0
CPH 2000
2000
695
495
7,0
CPH 2400
2400
915
715
8,2
2. 2 Operation
Connect the heating convector to the mains supply
to set it into operation.
Switching the appliance on
Switch on the appliance by setting the tumbler switch
to position „1“.
Switching the heating on
Switch on the heating by turning the temperature selector switch and choose the required temperature.
The temperature range extends from 4°C to 40°C graduated into 10 steps. The thermostat switches off
the heating as soon as the preset ambient temperature is reached, which will then be kept constant by
cyclic heating. The high consistency of the thermostat (below 2 K) provides a constantly comfortable
temperature and thus ensures power-saving heating.
Anti-freezing protection
When setting the temperature selector switch to grade „1“ the thermostat automatically cuts in if the
ambient temperature falls below 4°C.
Switching the appliance off
Switch off the appliance by setting the tumbler switch to position „0“.
3. Important notes
During operation the temperature at the front panel and at the hot-air outlet of the convector may rise
above 85 °C. Do not place any objects on or beside the heater, do not put anything between the heater
and the wall. Free air exit must not be hindered by covering the hot-air outlets with any objects such as
curtains, pieces of laundry etc., otherwise risk of overheating. Combustible objects such as wood, paper,
textiles etc. as well as highly flammable substances such as wax, petrol, aerosols must not be placed
near the heater within the hot-air current. Switch the heater off when carrying out work where highly
flammable vapors could emerge, such as laying or sealing parquet or other kinds of floor covering or
when using aerosols, floor wax, petrol etc.
GB
