Technotherm CPH 1000 Installation And Technical Manual Download Page 2

 

 

2  

 

Edition:01/14

 

 

Manual 

CPH 1000 - 2400

 

 

1. Important Safety instructions 

 

People (including children) who are limited in their physical, sensory, or mental capacities should 
not use this device at any time. Furthermore do not handle this instrument if you do not possess 
the necessary experience and knowledge to do so. This device should only be handled under the 
supervision of a qualified person and after a thorough introduction. 

 

Do not leave children alone with the device, and supervise them at all times to keep them from 
getting harmed. 

 

WARNING: Do not cover! Otherwise this instrument will overheat. 

 

Do not place the heater underneath a socket, drainage or the like. 

 

To keep from getting burned, do not touch heater´s surface whenever it is turned on. 

 

Please use the handle whenever you have to move the heater. 

 

Do not put the cord underneath the carpet or a rug and make sure that it is not a tripping hazard. 

 

Plug the heater into properly grounded sockets only. 

 

Do not use the heater in any other way than described in the user manual. Any other way of use 
may lead to fire, electrocution, and may cause serious harm to the person. 

 

Do not use this device near bathtubs, showers or swimming pools. 

 

In case the connection cable is damaged it has to be replaced by the manufacturer or someone 
commissioned by the manufacturer. 

 
WARNING: Do not use a switching-oriented device, like a timekeeper, when operating this heater. 
This could cause a change in the thermal adjustment which is potentially hazardous! 

 

 

To keep the device from overheating, do not put towels or clothing on top. 

 

When using the heater, make sure it is in an upright position and positioned on a even and dry 
place. 

 

Do not put any foreign objects into the vent. This may cause electrocution, fire or damage to the 
heater. 

 

Do not use an extension cord unless approved by an electrician. 

 

This device is for private use only, do not use in any other way than intended by the 

manufacturer. 

 

Do not use the device near curtains, highly combustible, extremely explosive or malleable 

materials. 

 

Keep a distance of a at least 1.0 m between combustible materials-  like furniture, cushions, 

bedding, paper, clothing, curtains-and the heating device. 

 

Do not use the device in rooms were petrol, paint or any other flammable liquids are stored. 

 

Do not use the device outside. 

 

 

 

 

Warning! This device has to be grounded 

 

This device may only be operated using alternating current and the operating voltage indicated 

on the power rating plate. 

 

 

Nominal Voltage            230V AC, 50 Hz

 

 

Protection Class            I 

 

Degree of Protection     IP 24 

 

Room Thermostat         4°C till 40°C 

 

 
 
 
 

GB 

Summary of Contents for CPH 1000







Reviews: