www.technotherm.com
Installa� on and Opera� ng Instruc� ons
Panel Heater MCT
www.technotherm.com
GB
17. Installa� on of Electricity
The device was developed for an electrical voltage of 230 V(nominal) and an alterna� ng current of (AC)
50 Hz. The electrical installa� on may only be performed according to the user manual and only by a
qualifi ed Electrician. The device was designed to be used with termina� on and the connec� on cable
has to be plugged into an appropriate socket at all � mes. (No� ce Permanent cables may not be used)
The distance between the receptacle and the device hast to be at least 10cm. The connec� on line may
not touch the device at any � me.
18. Regula� on
From 01.01.2018, the EU conformity of these devices is addi� onally linked to the fulfi llment of the
Ecodesign requirements 2015/1188.
The installa� on and commissioning of the devices is only permi� ed in conjunc� on with external room
Temperature controllers that fulfi ll the following func� ons:
•
electronic room Temperature control
and has at least one of the following proper� es:
•
room Temperature control, with presence detec� on
•
room Temperature control, with open window detec� on
•
with distance control op� on
•
with adap� ve start control
The following room Temperature controller systems
•
MCT-Thermostat
from TECHNOTHERM meet the following requirements and therefore the ErP Direc� ve:
•
electronic room Temperature control plus week � mer
•
room Temperature control, with open window detec� on
•
room Temperature control, with presence detec� on
Use of the Standard range (without external/internal thermostat control) is only permi� ed on feet.
For customer service - see last page.
Failure to comply with these requirements will result in the loss of the CE mark.
