Technosoft IO iMOTIONCUBE CAN Technical Reference Download Page 5

Page: 5 / 26

IO-iMOTIONCUBE Technical Reference

3.3

Connectors ......................................................................................................... 12

3.3.1

Connectors Layout and Description ....................................................................... 12

3.3.2

J1..J7 – iMOTIONCUBE pass through connectors ................................................. 13

3.3.3

J8, J9 – CAN connector for -CAN drives and IO PN P025.326.E201 ..................... 13

3.3.4

J8, J9 – EtherCAT connector for -CAT drives and IO PN P025.326.E221 .............. 13

3.3.5

J10 – Digital I/O and analog inputs connector ........................................................ 13

3.3.6

J11 – Power supply input connector ...................................................................... 14

3.3.7

J12 – Motor output connector ................................................................................ 14

3.3.8

J13 – Feedback #1 connector (2x5 pin) ................................................................. 14

3.3.9

J14 – Feedback #2 connector (2x5 pin) ................................................................. 15

3.3.10

J15 –Digital hall connector .................................................................................. 15

3.3.11

J17 – STO (Safe Torque Off) connector ............................................................. 15

3.3.12

J18 – USB connector .......................................................................................... 15

3.3.13

J19 – RS232 connector ...................................................................................... 16

3.3.14

SS1 – Sliding Switch 1 – STO/Enable bypass .................................................... 16

3.4

Mating connectors .............................................................................................. 16

3.5

Jumper settings .................................................................................................. 17

3.6

Default jumper settings....................................................................................... 17

3.7

Axis ID and CAN Protocol selection for CAN drives ........................................... 18

3.8

Axis ID Selection for iMOTIONCUBE-CAT-STO drives with EtherCAT.............. 23

3.9

First Power Up ................................................................................................... 23

Appendix 1:

IO-iMOTIONCUBE schematics

....................................................... 24

Appendix 2:

iMOTIONCUBE Plug-in Connector Pin-out

..................................... 25

Summary of Contents for IO iMOTIONCUBE CAN



























Search results

Summary of Contents for IO iMOTIONCUBE CAN

Reviews:

Related manuals for IO iMOTIONCUBE CAN

Brands by name

Popular brands

Technosoft IO iMOTIONCUBE CAN, Technical Reference

Search results

Summary of Contents for IO iMOTIONCUBE CAN

Reviews:

Related manuals for IO iMOTIONCUBE CAN

Brands by name

Popular brands