Maintenance of Speaker Body
The Technomad polyethylene loudspeaker cabinet is a manufacturing
breakthrough. The one-piece Technomad speaker cabinet provides a
very rugged, watertight and scratch-resistant enclosure for transporting
the high-quality sound reproduction electronics. Your Technomad speaker
will need very little maintenance. If, after some time, you want to elimi-
nate scratches that develop, follow these simple instructions:
Technomad Cabinet Refurbishment:
1.
Thoroughly clean the surface of the speaker using warm water, a soft
brush, and mild non-detergent soap.
2.
Dry the loudspeaker.
3.
Using a propane blowtorch, slowly fan the flame over the scratches you
need to repair. In a few seconds you will see the scratches disappear
and the surface will become shiny as a thin film of plastic liquifies. Deep
scratches may take longer to erase. IT IS POSSIBLE TO CHAR THE
SPEAKER if the flame is kept on one area for too long. Constantly keep
the flame in motion. Keep the flame away from the loudspeaker cones,
compression drivers, foam grill covering, Neutrik jacks and other hardware.
SPECIAL CARE IS NEEDED WHEN FLAME TREATING PARIS, and
VIENNA LOUDSPEAKERS.
4.
Allow the surface to completely cool for 15 or more minutes or until the
treated area is cool and hard to the touch.
5.
Buff the surface with a 3M™ Scotch-Brite pad, fine steel wool or other
mild abrasive. This will bring the treated surface area back to the original
factory finish.
Before
After
Cabinet Maintenance
Technomad loudspeakers are designed for maximum flexibility and ease
of use. Technomad offers several accessories which enhance the day-to-
day practicality of our loudspeakers.
The Technomad Dolly-
This four wheel dolly locks onto the back of any large Technomad
loudspeaker. Featuring four 5” diameter rubber wheels, the dolly
allows the user to easily transport up to 4 large Technomad speakers.
The Noho Dolly-
A smaller version of the Technomad dolly, the Noho Dolly is
compatible with the Noho and Soho model loudspeakers. It
features 3.5” diameter casters.
The Monitor Tube Set-
This set allows all AS series loudspeakers to be used as floor monitors.
The Paris/Vienna Wall-mount bracket
This multi-position bracket allows Paris and Vienna loudspeakers
to be
mounted to walls and accurately deployed.
One of the following accessories are neccesary when stacking
Technomad AS Series loudspeakers.
The Stacking Tube Set-
This set allows any two AS Series Tour Model loudspeakers to
be
securely stacked
in either horizontal or vertical orientation.
The Plug & Play System-
These components allow AS Series loudspeakers to be quickly
and
easily assembled into large arrays. See page 5 for more details.
The TwoPlug- Connects two speakers
The FourPlug- Connects four speakers
The Base-
Connects the stack to the floor
Technomad T-Shirt-
XL T-shirt, white Technomad logo on front.
Accessories
3
10
