Technom Lokring MTK400 Instruction Card Download Page 3

Page: 3 / 6

4.1

Mark the "inspect" and "install" areas
on both sides of the pipe

4. mark the pipe

5.1

Twist and remove the protective caps
of the hydraulic hose

5. prepare the Lokring tool

5.2

Connect the hydraulic hose to the
pump and the Lokring tool

5.3

Tighten the retainer rings manually

Slide the Lokring ﬁtting over the pipe.
Check the "install" mark

6. put the Lokring ﬁtting in place

7.1

Place the Lokring tool over the Lokring
ﬁtting

7. install the Lokring ﬁtting

questions? +31 343 492 090 • technom.com

6.1

installation

Summary of Contents for Lokring MTK400

Page 1: ... sandpaper 180 400 grade not deliverd as standard 1 2 2x 4 insert blocks 1 1 1x foam lined plastic case 1x IT 400 Lokring toolhead 1x hydraulic pump 1x hydraulic hose 1x Jaw Retraction Tool JRT 1x marker pen 1x instruction card delivered as standard Check that everything is in the case before starting assembly questions 31 343 492 090 technom com ...

Page 3: ... the Lokring tool 5 2 Connect the hydraulic hose to the pump and the Lokring tool 5 3 Tighten the retainer rings manually Slide the Lokring ﬁtting over the pipe Check the install mark 6 put the Lokring ﬁtting in place 7 1 Place the Lokring tool over the Lokring ﬁtting 7 install the Lokring ﬁtting 03 questions 31 343 492 090 technom com 6 1 installation ...

Page 4: ...the inspect mark the end of the Lokring ﬁtting s body protrudes from underneath the drive 7 2 Place the insert blocks in the Lokring tool and ﬁx them in position 7 3 Note keep out of the line of ﬁre Pump until the driver of the Lokring ﬁtting touches the body 8 1 04 questions 31 343 492 090 technom com 8 1 8 check the assembly installation ...

Page 6: ......