Sand the pipe, first grade 80-120 and
then finely grade 180-400)
2. access the pipe
Make sure that the pipe meets the
following criteria:
• no corrosion or pitting;
• no lettering or engraving;
• no lenghtwise scratches or grooves
2.3
Check the external diameter of the pipe
with the gage
3.1
Cut the pipe as squarely as possible
(< 5 degrees)
3. prepare the pipe
Deburr the end of the pipe
3.3
Use the Go-NoGo gauge to check the
squareness of the cut. The bevel angle
of the pipe must fall within the 5° tolerance
02
questions? +31 343 492 090 • technom.com
2.1
2.2
3.2
keep out of the line of fire at all times
installation
Summary of Contents for Lokring MTK400
Page 6: ......
