Technologic Systems TS-7200, User Manual, Page: 37 / 52

15 Console on the TS-7200
The TS-7200 has no video controller or keyboard interface. This was done to keep the
board size small and the cost low. COM1 is typically used as a console port to interface
the TS-7200 to a standard terminal emulation program on a Host PC.
Simply connect an ANSI terminal (or emulator) to COM1 using a null modem cable (this
is included in the TS-7200 Development Kit), using serial parameters of 115,200 baud,
8 data bits, no parity, 1 stop bit, and make sure jumper
JP2 is installed.
The console can be changed to COM2 by installing JP4 (with JP2 also installed).
If your application does not require a console or both COM ports are required, then
removing the jumper
JP2 easily disables all console output.
TS-7200 User's Manual Technologic Systems http://www.embeddedARM.com/
33 12/2004