TO SET ALARM:
1.
Press and hold the AL/HR key, the (((
•
))) and ALM icon will appear and the alarm time on the LCD will
start flashing.
2.
Set the hour and minute of the desired alarm time by use of the AL/HR (hour) or the MODE/MIN (minute)
keys respectively.
3.
Once the alarm time is set, press the SNOOZE key to confirm and exit or wait approximately 8 seconds
for automatic timeout.
TO ACTIVATE/DEACTIVATE THE ALARM:
Press the AL/HR key. The alarm icon (((
•
))) will appear/disappear indicating that it is ON or OFF.
Note:
The maximum duration of the alarm ringing is 1 minute 36 seconds.
SNOOZE SETTING
The snooze time is set as default for 5 minutes by the manufacturer. The snooze mode will be activated from
the start of next minute after the SNOOZE key was pressed – it does not count the current minute that it was
pressed in.
To use the snooze feature, simply press the SNOOZE key when the alarm is sounding and the alarm will
snooze for 5 minutes before automatically sounding again. When the alarm is snoozing, the alarm icon (((
•
)))
will start flashing indicating that the alarm is active but is in Snooze mode.
To stop the snooze function when it is in snooze period, press and hold the SNOOZE key until a “Beep” is
sounded. You can also press the AL/HR key or the MODE/MIN key once to stop the snooze function.
LCD SCREEN DESCRIPTIONS
The Projection Clock can display information of time; indoor and outdoor temperature; second; weekday and
day; and day and month on the LCD only.
The projection can only display the time and the outdoor
temperature
.
The clock LCD can toggle between the 4 display modes when pressing the MODE/MIN key:
DCF-77 Tower icon
Time
Weekday and day display
Outdoor temperature
display in degree Celsius
Seconds display
Day and month display
Indoor temperature
display in degree Celsius
