TO AFFIX USING DOUBLE-SIDED TAPE, FOLLOW THESE STEPS:
1.
Clean both surfaces before affixing double-sided tape.
2.
Peel one side of the tape and press it firmly against the back of the holder.
3.
Now peel the other side of the tape and stick the holder firmly onto the
surface. Do not stick onto bricks, enamel finished or greasy surfaces.
Note:
Do not secure the transmitter on metal frames or doors because this
may cause interference with 433MHz transmission.
BATTERY CHANGE
It is recommended to replace the batteries in the unit on an annual basis.
Please help in the preservation of the environment.
Return used batteries to an authorized depot.
SPECIFICATIONS
Projection temperature display range
: -29°C to +69°C with 1ºC resolution
Projection distance
: maximum 2 meters
Temperature measuring range
•
Indoor
: 0°C to +49°C with 0.1ºC resolution
•
Outdoor
: -29.9°C to +69.9°C with 0.1ºC resolution
Temperature checking interval
•
Indoor
: every 10 seconds
•
Outdoor :
every
5
minutes
Outdoor temperature transmission
: every 1 minute
Transmission frequency
: 433.92 MHz
Transmission distance
: maximum 25 meters in open field
Power source
Projection Clock
: 3 x AA, IEC LR6, 1.5V batteries
(Alkaline
battery
recommended)
Or
AC power source with input 230VAC 50Hz
(Use the provided AC-DC adapter only)
Outdoor Temperature Transmitter
: 2 x AAA, IEC LR3, 1.5V batteries
(Alkaline
battery
recommended)
Battery life
: Approximately 12 months
Dimensions (L x W x H)
Projection Clock
: 142.4 x 36.4 x 99 mm
Outdoor Temperature Transmitter
: 59 x 22 x 65 mm
MAINTENANCE
•
Avoid placing the Projection Clock in areas prone to vibration and shock as this may damage and
inaccurate readings.
•
Avoid exposure to sudden changes in temperature such as direct sunlight, extreme cold and wet or moist
conditions.
•
When cleaning the display and casing, use a soft damp cloth only.
Do not use solvents or souring agents as they may mark the LCD and casing.
•
Do not submerge the Projection Clock into water.
•
Do not attempt to make any repairs to the Projection Clock. Return it to its original point of purchase for
repair by a qualified engineer. Opening and tampering with the unit may invalidate its guarantee.
