P. 4
Place your clock at a location with optimal signal, i.e. close to a window and way from metal surfaces
or electrical appliances.
DCF SINGAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The
icon flashes.
Weak or no DCF signal
(only
icon flashing)
Receiving strong DCF signal
(
icon flashing)
Successful Reception
(
icon becomes static)
Failed Reception
(
icon disappear)
Automatic reception and Manual Reception
Your clock starts automatic reception everyday at 1:00, 2:00, 3:00. If it fails to receive the DCF time
signal at 3:00, it will start reception at 4:00. If it fails again it will start reception at 5:00. If it fails
again it will start automatic reception at 1:00 again in the next day.
Manual reception: press and hold
/
button until you hear a short beep to start manual
reception. Press and hold
/
to stop reception.
Remark: when your clock is receiving radio controlled time signal, the wake-up-light and color
changing light functions are disabled, and all buttons do not function until the reception is finished.
TO SET CALENDAR, 12/24 TIME AND TIME
1. Press and hold SET for 2 seconds, time digits change to “24 Hr” and flash, press
/
to
select “12 Hr” time format or “24 Hr” time format. When 12HR is selected, AM or PM
will be displayed.
2. Then press SET once again, time digits change to “00”and flash. Press
/
button to
select the time zone:
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
“-01” = GMT 00 hour (e.g. U.K.)
3. Then press SET once again, hour digits flash. Press
/
button to set hour.
4. Then press SET once again, minute digits flash. Press
/
button to set minute.
