Technoline WS9255, Manual

Page: 15 / 78

EN5

A flashing radio mast icon indicates that the DCF signal reception has started

A continuously displayed radio mast icon indicates that the DCF signal was received
successfully

We recommend a minimum distance of 2.5 meters to all sources of interference,
such as televisions or computer monitors

Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in
offices. In such extreme circumstances, place the system close to the window.

During the DCF reception mode, only the
"SNOOZE/LIGHT" and
“
WAVE
” button function, other buttons have no function.
If
you want to use other functions , please press the
“
WAVE
” button to exit the
DCF reception mode.
Manual time setting:

Press and hold the “MODE” button for 2 seconds, the temperature unit in °C starts to
flash. Now use “+” and “-” buttons to choose between °C or °F temperature unit.

Press “ MODE”
button to confirm your setting, 12/24HR start
to flash. Now use “
+
”
and “
-
” buttons to set the set 12 or 24 hour mode.

Press “ MODE”
to confirm your setting, the time zone starts to flash.
Now use “
+
” and
“
-
” buttons set a time zone (-12 to +12). For example for UK, the time zone is -01,
for Germany it is 00.

Press “ MODE”
to confirm your setting, the Hour display starts to
flash. Now use “
+
”
and “
-
” buttons to set the hour.

Press “ MODE”
to confirm your setting, the Minute display
starts to flash. Now use “
+
”
and “
-
” buttons to set the minute.

Press “ MODE”
button to confirm your setting, the weather forecast pattern display
starts to flash. Now use “
+
” and “
-
” buttons to select the current weather pattern.

Press
“ MODE”
to confirm your setting and to end the setting procedures. Then the
station will return to the normal mode.
Please note:

If there is no valid operation within 20 seconds, the station will automatically return to
normal time mode from the set mode.
Setting the alarm:

Press
“ +”
button once
, LCD display the “ ” icon, the alarm function is ON, Then
press once “ +”
button, the
“ ” icon will disappear from the display, the alarm
function is OFF.

Press “ MODE”
button once, LCD displays alarm time. Then press and hold
“ MODE”
button for 2 seconds until hour of the a
larm time starts to flash. Use the “
+
” and “
-
”
buttons to set the hour.
Press “ MODE”
button to confirm your setting.

The minute of the a
larm time starts to flash. Use the “
+
” and “
-
” buttons to set the
minute.
Press “ MODE”
button to confirm your setting.

The snooze time of the a
larm starts to flash. Use the “
+
” and “
-
” buttons to set the
required minute. The snooze time can be set from OFF to 60 minutes.

Press “ MODE”
button to confirm your setting and to end the setting procedure.
Please note
:

If there is no valid operation within 20 seconds, the station will automatically return to
normal time mode from the alarm time set mode.