5. Do the above operation in this sequence: 12/24 Hr > Hour > Minute > Second > Time zone.
6. Press and hold “DISPLAY SET” key for 3 seconds to save and exit the setting.
Note:
If your local time is different from the RC received time, you can set the desired time zone.
The available time difference is from -23 hours to +23 hours. After setting the desired time difference,
the temperature station will show the time that RC received time plus/minus the time difference.
ALARM TIME SETTING
1. In normal time mode, press and hold “ALARM SET” key for 3 seconds until the Hour digit flashing.
2. Press “+” / “-” key to adjust the value of the flashing digit.
3. Press “ALARM SET” key again to step the setting value to Minute with the Minute digit flashing.
4. Press “+” / “-” key to adjust the value of the flashing digit.
5. Pre
ss “ALARM SET” key to save and exit the setting.
Note:
The alarm function will turn on automatically once you set the alarm time.
USING ALARM AND SNOOZE FUNCTION
1. Set the desired alarm time as described in the above section.
2. Press “ALARM SET” key to display the alarm time, press it again to turn on alarm function with the
alarm icon “
” displayed on the LCD.
3. When temperature station reach the alarm time, alarm sound will start. Where, it can be stopped by
following operation:
1). Auto-stop after two minutes alarming if without any operation and it will re-alarm by the next day.
2). By pressing “SNOOZE” key to enter snooze that the alarm will sound again after 5 minutes.
3). By pressing “ALARM SET” key to turn off the alarm function.
Note:
1. The snooze could be used continuously in 24 hours.
2. During the snooze, the alarm icon will keep flashing.
VIEW THE CHANNEL
