POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The Temperature Transmitter is supplied with a holder that may
be attached to a wall with the three screws supplied. To attach
to the wall, please follow the steps below
:
1.
Mark the wall using a pen through the holes in the holder
to obtain the exact drilling position
.
2.
Drill holes in the wall at the points marked
.
3.
Screw holder onto wall
.
There is also double sided tape included with the wall mount. On smooth surfaces
this can be used instead of drilling holes. The mounting surface can, however,
affect the transmission range. If for example the unit is attached to a piece of metal,
it may then either reduce or increase the transmitting range. For this reason, we
recommend not placing the unit on any metal surfaces or in any position where a
large metal or highly polished surface is in the immediate proximity (garage doors,
double glazing, etc.). Before securing in place, please ensure that the Temperature
Station can receive the 433 MHz signal from the Temperature Transmitter at the
positions that you wish to situate them.
The Temperature Transmitter simply clicks in or out of the holder. When inserting or
removing the Temperature Transmitter to or from the wall holder please hold both
units securely.
CARE AND MAINTENANCE:
Extreme temperatures, vibration and shock should be avoided as these may
cause damage to the units and give inaccurate forecasts and readings.
When cleaning the displays and casings, use a soft damp cloth only. Do not
use solvents or scouring agents as they may mark the LCD and casing.
Do not submerge the units in water.
Immediately remove all low powered batteries to avoid leakage and damage.
Replace only with new batteries of the recommended type.
Do not make any repair attempts to the unit. Return it to its original point of
purchase for repair by a qualified engineer. Opening and tampering with the
unit may invalidate its guarantee.
Do not expose the unit to extreme and sudden temperature changes, as this
may lead to rapid changes in forecasts and readings and thereby reduce its
accuracy.
SPECIFICATIONS:
Temperature measuring range:
Indoor
: -9.9ºC to +59.9ºC with 0.1ºC resolution
(“OFL” displayed if outside this range)
Outdoor
: -30ºC to +70ºC with 0.1ºC resolution
(“OFL” displayed if outside this range)
Indoor Temperature checking interval
: every 10 seconds
Outdoor Temperature reception
: every
5 minutes
Power
Supply:
Temperature Station
: 2 x AA, IEC LR6, 1.5V
Temperature Transmitter
: 2 x AAA, IEC LR3, 1.5V
Battery life cycle
: approximately 12 months
(Alkaline batteries recommended)
Dimensions (L x W x H)
Temperature Station (without stand)
: 108 x 30 x 151 mm
Outdoor Transmitter
: 59 x 22 x 65 mm
LIABILITY DISCLAIMER:
The manufacturer and supplier cannot accept any responsibility for any
incorrect readings and any consequences that occur should an inaccurate
reading take place.
This product is not to be used for medical purposes or for public information.
This product is only designed to be used in the home as indicator of
temperatures and is not 100% accurate. Readings given by this product
should be taken only as an indication and not as being totally accurate.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written consent of the
manufacturer.
R&TTE Directive 1999/5/EC
Summary of the Declaration of Conformity : We hereby declare that this wireless transmission
device does comply with the essential requirements of R&TTE Directive 1999/5/EC.
