50
Minutes (flashing)
Hours (flashing)
The time zone default is "0 hour
"
. To set a different time zone:
1.
The current time zone value starts flashing.
2.
Use the
+
key to set the time zone. The range runs from 0, -1, -2…-12, 12, 11, 10… 2, 1, 0, in
consecutive 1-hour intervals.
3.
Confirm with the
SET key and enter the
Manual Time setting.
MANUAL TIME SETTING
In case the Weather station is not able to detect the radio-controlled time (DCF time) signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz
clock.
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute setting.
3.
The minute will be flashing. Press the + key to just the minutes.
4.
Confirm with the SET key and enter the
“Calendar Setting”.
Summary of Contents for WS 9632
Page 1: ...SIZE 123 70MM...
Page 91: ...90 26 C 78 8 F 19 25 9 C 66 2 78 6 F 10 18 9 C 50 66 F 0 9 9 C 32 49 8 F Ensoleill...
Page 126: ...125 26 C 78 8 F 19 25 9 C 66 2 78 6 F 10 18 9 C 50 66 F 0 9 9 C 32 49 8 F 0 C 32 F Zonnig...
Page 162: ...161 26 C 78 8 F 19 25 9 C 66 2 78 6 F 10 18 9 C 50 66 F 0 9 9 C 32 49 8 F 0 C 32 F Variabile...
