background image

When the maximums or minimums are displayed, press and hold the 

MAX-MIN

 button to reset both 

records and it will start to record the maximums and minimums again.  
 

IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY 

When the outdoor temperature and humidity digits show '---", the wireless transmission is either 
interrupted or lost. Press and hold the 

MAX-MIN /

 

OUT TEMP

 button on the clock once. If you continue 

to lose the outdoor temperature display, try placing the transmitter in a different location until you have 
smooth transmission of temperature data.  

 
TROUBLESHOOTING  

In case your weather station clock shows irrelevant information or digits, it maybe affected by 
electrostatic discharge or interferences from other devices. Press the 

RESET

 button on the top right of 

your unit. Your unit will be reset to default settings and it will start to receive outdoor temperature and 
humidity and then DCF signal again.     
 

Problem

 

Solution

 

LCD is blank 

1. 

Press RESET on the main unit. 

2. 

Replace fresh alkaline batteries. 

No Outdoor Temperature and 
Humidity is displayed 

1. 

Press and hold MAX-MIN / OUT TEMP on the weather 
station. 

2. 

Press and hold MAX-MIN / OUT TEMP, then press RESET on 
the outdoor sensor. 

3. 

Observe if the Low Battery icon appears on the left of the 
outdoor temperature. If yes, replace batteries in outdoor 
sensor with fresh alkaline batteries. 

4. 

No other interfering sources are being used (such as 
computer monitors, TV sets, headphones, or speakers) in the 
path of signal from the outdoor sensor. The signal travels in a 
straight line, an electrical source near that “line” may cause 
interference. 

Temperature, humidity, or air 
pressure is incorrect 

1. 

Press RESET on the main unit. 

2. 

Make sure your main unit and the outdoor sensor is away 
from sources of heat / cold / direct sunshine. 

DCF time and date will not set 
or update 

1. 

Wait until overnight for signal to be received. 

2. 

Move your weather station away from sources of electricity. 

Time is one or few hours off 

1. 

Make sure you select the right time zone. 

 
 

CARE OF YOUR WEATHER STATION CLOCK  

1. 

Do not expose the unit to extreme temperature, water or direct sunlight. 

2. 

Avoid contact with any corrosive materials. 

3. 

Do not subject the unit to excessive force, dust or humidity. 

4. 

Do not open the inner back case or tamper with any components of this unit. 

 

 
 

Reviews: