Weak or no DCF signal
(only icon flashing)
Receiving strong DCF signal
(
icon flashing)
Successful Reception
(
icon becomes static)
Failed Reception
(
icon disappear)
Remark : when your clock is receiving radio controlled time signal, all buttons except the snooze / light
button do not function.
DCF TIME SIGNAL RECEPTION
Your weather station will automatically update itself to the exact time after receipt of the DCF time code.
This typically takes over night. The clock will automatically attempt to receive the DCF signal every
night at 1:00 am, 2:00 am, 3:00 am, 4: 00 am and onwards. If it receives DCF signal at 3:00 am it will
stop receiving until 1: 00 am next day.
To start DCF reception manually, press WAVE / - /
°
C/
°
F button for 2 seconds. To stop DCF reception,
press and hold WAVE / - /
°
C/
°
F for 2 seconds.
TO ADJUST THE VIEWING ANGLE
You could adjust your weather station clock to 3 different angles for better viewing.
Remark: Do not over push the top case backward with force or you may break the stand.
TO SET CALENDAR, TIME, 12/24 HR TIME FORMAT
1. Press and hold
SET / ALM SET
for 2 seconds, time digits change to year “2009” and flash. Press + /
- to set year.
2. Then press
SET / ALM SET
once again, month digits flash. Press +/- button to set month.
3. Then press
SET / ALM SET
once again, date digits flash. Press +/- button to set date.
4. Then press
SET / ALM SET
once again, time digits change to “00”, press +/- to select time zone: -
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
“-01” = GMT 00 hour (e.g. U.K.)
6. Then press
SET / ALM SET
once again, hour digits flash. Press+/- to set the hours.
7. Then press
SET / ALM SET
once again, minute digits flash. Press +/- button to set the minutes.
