46
SETTING UP:
When one transmitter is used
1.
First, insert the batteries into the Temperature transmitter. (see “
Install
and replace batteries in the Temperature transmitter
“).
2.
Immediately after and within 30 seconds, insert the batteries into
Temperature station (see “
Install and replace batteries in the
Temperature station
”). Once the batteries are in place, all segments of
the LCD will light up briefly. Following the time as 0:00 and the indoor
temperature will be displayed. If these are not displayed after 60 seconds,
remove the batteries and wait for at least 10 seconds before reinserting
them.
3.
After inserting the batteries, the Temperature station will start receiving
data from the transmitter. The outdoor temperature and the signal
