8
Figure 1 Securing the Rails
b)
Select the proper size in the rack for positioning the UPS (see Figure 2). The rail
occupies four positions on the front and rear of the rack.
c)
Tighten four M5 Umbrella Nuts in the side of rail assembly (see Figure 1).
d)
Fix one rail assembly to the front of the rack with one M5×12 pan-head screw
and one M5 cage nut. Using two M5 cage nuts and two M5×12 pan-head screws,
to fix the rail assembly to the rear of the rack.
Figure 2 Fixing the Rails
e)
Repeat Steps 3 and 4 for the other rail assembly.
f)
Tighten the four butterfly nuts in the middle of each rail assembly.
g)
If installing optional cabinets, repeat Step 1 through Step 6 for each rail kit.
h)
Place the UPS on a flat, stable surface with the front of the cabinet facing to you.
i)
Align the mounting brackets with the screw holes on each side of the UPS and fix
with the supplied M4×8 flat-head screws(see Figure 3)
Figure 3 Installing the Mounting Brackets
j)
If installing optional cabinets, repeat Step 8 and 9 for each cabinet.
k)
Slide the UPS and any other optional cabinets into the rack.
