34
5.
Storage and Maintenance
Operation
The UPS system contains no user-serviceable parts. If the battery service life (3~5
years at 25°C ambient temperature) has been exceeded, the batteries must be
replaced. In this case, please contact your dealer.
Storage
Before storing, charge the UPS 5 hours. Store the UPS covered and upright in a
cool, dry location. During storage, recharge the battery in accordance with the
following table:
Storage Temperature
Recharge Frequency
Charging Duration
-25°C - 40°C
Every 3 months
1-2 hours
40°C - 45°C
Every 2 months
1-2
hours
6.
Options
SNMP card: internal SNMP(options)
◆Loosen the 2 torquescrews (on each side of thecard).
◆Carefully insert the SNMP card and lock the screws
The slot called SNMP supports the MEGAtec protocol.We advise that Net
AgentII-3 port is also a tool to remotely monitorand manage any UPS system
NetAgentII-3Ports supports the Modem Dial-in(PPP) function to enable the
remote control via the internet when the network is unavailable.
In addition to the features of a standard NetAgent Mini,NetAgent II has the
option to add Net Feeler Lite to detect temperature,humidity,smoke andsecurity
sensors.Thus,making NetAgent II aversatile management tool.NetAgent II also
supports multiple languages and is set up for web-based auto languagedetection.
Typical topologyof the UPS NetworkManagement
Relaycard
(options)
Mini dry contact card is used foproviding the interface for UPS peripheral
monitoring. The contact signals canreflect UPS running status.The card is
connected to peripheral monitoring devices via terminal board to facilitate the
Be sure to deliver the spent battery to a recycling facility or
ship it to your dealer in the replacement battery packing material.
