AutoGRAPH-ST
– Remote Control Command
19
GSMPORT
Command
GSMPORT
Name
Data server port
Supported with firmware
AGST-0.75 and higher
Description
Command is intended to set a port number of data
server which the device sends data to.
Be sure that the specified port is enabled in the server
firewall settings.
Command format:
password GSMPORT=port;
parameters of the commands:
port
– a port number for transferring data.
Sample command:
5672 GSMPORT=2225;
Sample reply:
#GSMPORT=2225;
The device sends data to the port
“2225” of data server.
