background image

AutoGRAPH-NAVIGATOR • USER MANUAL

41

TechnoKom © 2015

Fig.44. Voice calls menu.

The keypad can be disabled using the NAVIGATOR configuration tool. In this case the label 

 is displayed on top of menu (see 

Fig.44

), as well as the GSM modem is not initialized yet.

Last calls history is displayed on the Voice call menu. Only contact from the Phone book is 

displayed in the short history. Depending on a call type, records are highlighted as follows:

• 

green – incoming call;

• 

red – missed call;

• 

blue – outgoing call. 

To see full history of voice calls, press the History button. The History menu (

Fig.45

) contains 

three sections:

• 

Missed – a list of missed calls;

• 

In – a list of incoming calls;

• 

Out – a list of outgoing calls. 

 

To go to the Main menu, press Menu button in the Voice call menu. To return to previous 

menu, press Back button.

Phone book of the Voice call menu is edited in the NAVIGATOR configuration tool. For more 
detailed information see section “Device configuration”.

i

NOTE

Fig.45. History of voice calls.

Summary of Contents for AutoGRAPH-NAVIGATOR




















































Reviews: