AutoGRAPH-Mobile • USER MANUAL
14
TechnoKom © 2016
Charging the battery
Before turning on and starting use of the AutoGRAPH-Mobile, it is recommended to charge
the battery.
The AutoGRAPH-Mobile comes with the USB power adapter and a USB cable (USB AM
– USB miniB 5pin) for charging the battery from an electrical mains of 220 V or from a PC.
To charge using the USB power adapter:
1.
Connect the small end of the USB cable to the USB-mini connector of the tracker.
2.
Connect the other end of the USB cable to the power adapter.
3.
Connect the power adapter to a power outlet. Charging will automatically start.
To charge using USB cable:
1.
Connect the small end of the USB cable to the mini USB connector of the tracker.
2.
Connect the other end of the USB cable to a PC. Be sure that the PC is turned on.
3.
Charging will automatically start.
During the charging NAVIGATION / CHARGING LED simultaneously flashes green and red
once a second. When the battery is charged the LED does not flash.
Average charging time is 160 minutes.
When connecting an external power to the tracker (using power adapter or USB cable), the tracker will
automatically start its operation.
i
NOTE
Switching on / off
When connecting the external power supply (using USB cable) the tracker automatically
switches on. When connecting to the internal battery the tracker must be switched on by
pressing the POWER button to start operation. Before switching on, be sure that the battery
is charged.
The POWER button is hidden in the tracker’s case. To press it:
• Unscrew the four fastening screws, remove the back cover of
the tracker and directly press the button;
• OR insert any pointed object (e.g. small bent paperclip) into
the small hole above manufacture’s label on the back cover.
