background image

16

SYNCHRO ARTIS

PLACE OF USAGE

In order to ensure that activities with the products are easy and risk-free for people, the area in which they take place must meet a number of specific requirements. 
In particular, when deciding where to install the product, make sure that the location satisfies the following requirements.
-  Temperature of b10°C and +25°C.
-  Sufficient air circulation, with the capacity to keep humidity levels between 20% and 90% during exercise.
-  Sufficient lighting, so that physical exercise can be done in pleasant, relaxing conditions.
-  An empty space at least 60 cm wide all around every product.
-  A flat, stable and vibration-free surface that is capable of supporting the weight of both the product and the user.

The product must be installed in a setting that meets all of the requirements of the relevant laws in force.
Do not expose the product to direct sunlight.
Do not use the product outside. Do not use the product outdoors, where it is exposed to the elements. Ensure that the product does not get splashed by water.
Do not place the product in locations with high moisture levels, such as swimming pools, whirlpool tubs and saunas.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

Summary of Contents for SYNCHRO ARTIS
































Reviews: