27
Run Personal
18
18 Switching on and off
To turn the equipment on, switch the main witch to the “
I
” position
(on) and press the additional switch. If the additional switch is lit,
the equipment is on.
After a quick system check (reset), the equipment is ready for use.
To turn the equipment off, switch off the additional switch and switch
the main switch to the “
0
” position (off).
The equipment must be switched off only at the end of the exercise,
when in standby.
If the equipment isn’t going to be used for a long time, as well as
turning it off you should also pull the plug out of the wall socket.
!
Warning
The switch is for turning the equipment on and off but does
not isolate it completely from the mains voltage, even in the
“
0
” position (off). For complete isolation you must unplug the
power supply plug.
