Technogym Recline Forma, Service Maintenance Manual, Page: 85 / 90

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.1
Page 10.3
10.3. TWICE-YEARLY MAINTENANCE OPERATIONS
These operations can only be carried out by a qualified technician specifically trained by
Technogym and authorized to carry out machine installation and adjustments, as well as
special maintenance operations or repairs which require special knowledge of the
machine, its operation, safety systems and working procedures.
The
twice-yearly maintenance operations involve checking the functioning, wear and tension of the
mechanical components so as to ensure the correct and safe operation of the machine.
For the twice-yearly maintenance of the machine, proceed as follows:
10.3.1. C
ARRYING OUT THE MONTHLY MAINTENANCE PROCEDURE
1. Carry out the procedure described in paragraph 10.2. “Monthly maintenance operations”.
10.3.2. S
ETTING UP THE OPERATION
1. Turn off the machine by placing the switch in position 0 (OFF).
2. Unplug the mains lead from the wall outlet.
10.3.3. C
LEANING OPERATIONS
1. Use a vacuum cleaner to clean the interior, paying particular attention to the brake.
WARNING: when carrying out these operations, be careful not to damage the cables.
10.3.4. C
HECKING THE WORKING CONDITIONS
1. Using a multimeter, check that the machine earth node is correctly connected to earth.
10.3.5. C
HECKING THE WEAR OF RUBBER PARTS
1. Check the state of wear of the rubber components. Replace if there are evident signs of wear.
10.3.6. C
HECKING THE BELT
1. Check the state of wear of the belt, using the pulley to turn it by hand, paying special attention to
the edges and the inner part. Replace if there are evident signs of wear.
2. Also check the tension of the belt.
10.3.7. C
HECKING THE DISPLAY
1. Check the operation of all the keys on the keyboard.
2. Check the operation of all the LEDs and the buzzer.
10.3.8. C
HECKING THE WIRING AND CONNECTIONS
1. Check the condition of all the cables:
•
External conditions;
•
Possible rusting of the connectors;
•
Electrical continuity of the individual wires;