8
02/02/2012
Turn the step unit by 90° (F1), turn the platform u nit by 90° and join it to the step unit (F2), tight en with 2
2 washers (F3) (REMEMBER TO PLACE A CARDBOARD PROTECTION SHEET BETWEEN THE FLOOR AND
SEAT ASSEMBLY)
phase 1
Insert the rear foot in the frame assembly, tighten with 2 screws (K) + 1 screw (J) + 2+2 w nut (F1), position and
tighten the piston unit plate with 2 screws (F2)
MACHINE ASSEMBLY SEQUENCE
Operator A/B
Turn the platform assembly by 90°, insert it in the frame assembly and tighten with 2+2 2+2 washers
F1
F2
F3
drafted by Fabrizio Frattini
approved by Andrea Borghesi
revision 1/1
