Technogym Glidex 600 XTPRO, Service Maintenance Manual

Page: 62 / 90

GLIDEX 600 XTPRO: Service & Maintenance Manual - rev. 1.1
Page 7.18
7.17. DISASSEMBLING THE PEDALS GROUP
Figure 7.17-1
For each PEDAL:
1. Unscrew the 4 screws
a fixing the PEDAL to
the pedal lever using a 5-mm hex T wrench.
2. Remove the PEDAL.
Figure 7.17-2
On each side of the PEDAL:
3. Back off the screw
b using a 3-mm hex T
wrench.
4. Back off the screw c using a 6-mm hex T
wrench.
5. Remove the rubber guard d .
6. Remove the PEDAL SUPPORT by pulling
upward.
Figure 7.17-3
7. It is now possible to access the shock
absorber e .
To reassemble the PEDALS GROUP, carry out
the above steps in reverse order.