TECHNOGYM BIKE LIVE Pre-Installation Requirements
Rev. 1.0
- 15 -
PIR-00161-EN - Uncontrolled copy if printed
5. NETWORK REQUIREMENTS
5.1 INTRODUCTION
TECHNOGYM BIKE supports both wireless and wired internet connection.
In all cases, the network must be installed and configured by the customer before Technogym deliv
-
ers the product, in accordance with the technical specifications set out below.
5.2 ETHERNET CABLED NETWORK
Connect the product to the wired network, taking into account the following requirements:
•
LAN Ethernet 10/100 GigaBit;
•
Category 5e/6 - UTP Ethernet cables with RJ45 patch;
•
Switch with a number of ports greater than the number of product connected.
It’s necessary to remove the shaped cap from the rear casing of the display, to connect the LAN
cable to the equipment.
Fig. 4
