C:\Documents and Settings\mconti.TECHNOGEL-USA\My Documents\MACCHINE\ARTESAN\ART
MANUALS\Mantegel\Inglese\MG 2V Istruzioni Inglese 01-08.doc
29
FOR INITIAL START-
UP, PRESS THE “ START” BUTTON AND WAIT FOR AT
LEAST 60 MINUTES BEFORE PRESSING ANY KEYS.
IF THE MACHINE IS DISCONNECTED FROM THE POWER SUPPLY FORONE OR
MORE DAYS, IT WILL BE NECESSARY TO PRESSS THE “ START” BUTTON AND
THEN WAIT FOR 30 MINUTES BEFORE PRESSING ANY KEY WHATSOEVER.
IF THE POWER SUPPLY IS NEVER DISCONNECTED FROM THE MACHINE
IT CAN BE STARTED WITHOUT HAVING TO WAIT FOR ANY PERIOD OF TIME.
Machine start-up:
CAUTION IMPORTANT
Checking efficient operation of safety device on front door
1)
Disconnect the power supply
t o t he cont rol
console by pressing t he
START
but t on
(
light off
)
2) Open t he f ront door (
F
) by rot at ing t he
handle (
MF
) ant iclockw ise and t hen pull
t ow ards t he outside.
3) Ext ract t he dasher (
1
) by grasping it by t he
spokes and pulling out w ards.
4) Reconnect t he pow er supply by pressing
t he
START
but ton (
light on
).
5) Press t he
ICE-CREAM
key and check the
bot tom of t he f reezing chamber. In the
cent re you w ill see t he t riangular dasher
device (
2
).
IF THE TRIANGULAR DASHER DEVICE (2)
DOES NOT ROTATE, THIS MEANS THAT THE
SAFETY DEVICE IS ACTIVATED AND IN
OPERATION
6) Close the f ront door (
F
) once again and lock
w it h t he handle (
MF
). The cont rol console
w ill light up sw it ching to
STOP
.
When carrying out periodic controls, if the
device is not operating, please call the
Technical Assistance Service immediately.
CAUTION:
The device is designed to operate only in emergencies when the front door (F) is opened before the
machine has been stopped using the STOP key.
