1B
OPERATION
1.9 Belt Change or Tightened
1 Remove the belt protections.
2 To loose the 4 nuts pos. A.
3 Move the eccentic pos. B to the lower point.
4 Remove the wasted belt and replace for a new one of the same size.
5 Move the eccentric pos. B to the higher point until the belt will be enough tightened.
6 Tight the nuts pos. A.
1.10 Engine´s Maintenance
The engine is an element that requires little maintenance, only it is necessary to have a minimum of
care in the cleaning and therefore it is necessary to clean the air filter every 150 working hours.
If the engine does not start, the causes can be the following ones:
CAUSE
SOLUTION
No fuel in tank
Fill fuel
Fuel faucet is closed
Open
Defect in the recoil starter
Repair or replace
No oil alert
Fill oil to the level
Engine switch in position OFF
Turn to position ON
1B-7
ENGLISH
