EN 3
Display modes
Press the“MODE” button once and the display will switch
from time to date. Press the “MODE” button once again to
switch to alarm time display.
Manual time setting
While time display, press and hold the “MODE” button for 2
seconds, the 12/24HR start to flash. Now use “+” and “-”
buttons to switch 12/24 hour mode.
Press “MODE” to confirm your setting, the Hour display
starts to flash. Now use “+” and “-” buttons to set the hour.
Press “MODE” to confirm your setting, the Minute display
starts to flash. Now use “+” and “-” buttons to set the
minute.
Press “MODE” to confirm your setting and to end the
setting procedures.
Please note:
If there is no valid operation within 20 seconds, the station
will automatically return to normal time mode from the set
mode.
