The time zone default is "0” hour. To set a different time zone:
1.
The current time zone value starts flashing.
2.
Use the + key to set the time zone. The range runs from 0, -1, -2…
-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.
3.
Confirm with the SET key and enter the Time reception On/Off
setting.
TIME RECEPTION ON/OFF SETTING
flashing
In area where reception of the radio-controlled time (DCF time) is not
possible, the time reception function can be turned OFF. The clock will
then work as a normal Quartz clock. (Default setting is ON).
1.
“On” will start flashing on the LCD.
2.
Use the + key to turn OFF the time reception function if necessary.
3.
Confirm with the SET key and enter the Manual time setting.
Note:
If the Time Reception function is turned OFF manually, the clock will not
attempt any reception of the radio-controlled time (DCF time) as long
as the Time Reception OFF function is activated. The Time Reception
icon and the DCF icon will not be displayed on the LCD.
MANUAL TIME SETTING
In case the Weather station is not able to detect the radio-controlled
time (DCF time) signal (due to disturbances, transmitting distance, etc.),
the time can be manually set. The clock will then work as a normal
Quartz clock.
Hours (flashing)
Minutes (flashing)
30
