9
4.
Device Installation
4.1
Install device
4.1.1
Please ensure the device is installed by an auto electrician otherwise you may
void your warranty if wired incorrectly resulting in damage to the device.
4.1.2
Installation Notice
•
Hide device properly inside the car body to avoid damages and security
from potential thieves.
•
Keep away from RF emission sources such as backing radar, car burglar
alarm and other vehicle mounted communication devices such as UHF and
car phones.
•
Device is best mounted under the dash and the AM/FM radio can be used
as a source of fused power (+12vDC/-12vDC/Ignition Acces12vDC).
•
Always connect to a fused power source such as suggested above. Never
connect directly to a power source that is not fused as it could result in fire.
•
Suggest using wide double-sided adhesive to fix into place or use cable ties
and other liable methods to fix.
•
Please ensure the built in GSM/WCDMA/LTE antenna and GPS antenna is
facing up (Towards the sky) when installing, without any metal material
covering the top as this could weaken the signal and cause the device to not
work properly.
•
Temperature sensor (Refrigerated Logistics) should be placed in the space
that needs to be detected.
4.2
Device Wiring Definition
Fuel Pump
