Menu Function overview
13
MENU Function overview
All of the function modules offer a wide range of information, measurement values, and parameters
that can be viewed via the menu "Functions." To give users a quick overview of the main settings,
experts can use the "user interface editor" to display all of the information that users need to see from
all the menus. This information later appears in the menu "Function overview." Only the most im-
portant information and parameters should be entered in the menu "Function overview," and other-
wise the overview would simply be too long. In other words, this menu is by far the most important
interface to users.
The following display is an example of the system with one heater circulation, one heat meter and a
DHW demand function:
HTG.CIRC.1 F: 5
OPERAT.: RS
TIME/AUTO
STANDARD
T.roomSETBACK: 15 °C
T.room STD: 20 °C
TIME
PRG:
----------------------
DHW_DEM F: 9
DHW TEMP.:
T.DHW ACT: 60,5 °C
----------------------
INPUTS
The controller automatically switches from any menu to the function overview when it is switched on
or if no operator's control is used for a few minutes, provided that the automatic option has been
activated in the user menu (recommended).
Code for Technicians:
In order to enable all of the setting parameters, open the function "User" in the device’s basic menu
and then select "Technician". Enter the product of 2
6
as the code!
