50
51
DE
EN
7.2.8
Volume adjustment (DRC)
The
Volume Adjustment
menu item is used to set the compression rate, which
compensates for dynamic fluctuations and the associated volume variations.
> Select
Menu >
Volume Adjustment
and press the
Selection knob.
>
Use the
Selection knob
to select one of the options:
DRC high
-
high compression
DRC low
-
low compression
DRC off
-
compression switched off.
>
Confirm the setting by pressing the
Selection knob
.
7.2.9
Deleting inactive stations
This menu item is for removing old stations and those no longer being received from
the station list.
> Select
Menu >
Deleting inactive stations
and press the
Selection knob.
This is followed by the
Delete
prompt asking if the inactive stations are to be
deleted.
> Using the
Selection knob
, select the
Yes
item and confirm by pressing the
Selection knob
.
7.2.10
Station sequence
The stations in the station list are usually displayed in alphanumeric sequence. If you
want to change this, please proceed as follows:
> Select
Menu >
Station Sequence
and press the
Selection knob.
> Select
Alphanumeric, Provider
or
Valid
and press the
Selection knob
to
accept the setting.
7.2.3
Saving a DAB+ station as a Favourites memory
The device memory can store up to 30 stations.
>
To add a station to the My favourites list, keep one of the
Preset 1- 3
buttons
pressed during playback until
saved
appears.
>
In order to save a station to a Favourites slot higher than 3, hold down the
Preset 4+
button until
Save preset
appears on the display.
>
Then use the
Selection knob
to select the Favourites slot you want and then
confirm your selection by pressing the
Selection knob
.
7.2.4
Retrieving a DAB+ station from the Favourites memory
>
Briefly press the
Preset 4+
button and use the
Selection knob
to select a
Favourites memory slot.
>
Press the
Selection knob
to play the station.
Alternatively:
>
Hold down one of the one-touch buttons
Preset 1 - 3
.
7.2.5
Deleting a Favourites memory
>
It is not necessary to delete a Favourites memory. An old station can be
overwritten by saving a new station.
7.2.6
Signal strength
>
Briefly press the
Info/Menu
button repeatedly until the signal strength bar is
displayed.
>
The display shows the signal strength using a bar graph. The mark shows the
minimum signal strength.
Stations with a signal strength below the required minimum signal intensity
are not transmitting a strong enough signal. Readjust the telescopic antenna.
7.2.7
Manual setting
This menu item is used to check the reception channels and can be used to align the
antenna.
> Select
Menu >
Manual setting
and press the
Selection knob.
>
Select a channel (5A to 13F) using the
Selection knob
.
Its signal intensity will now be shown on the display.
Stations with a signal strength below the required minimum signal intensity
are not transmitting a strong enough signal.
Summary of Contents for VIOLA 2 C IR
Page 1: ...VIOLA 2 C IR...
Page 2: ...2 DE EN Bedienungsanleitung VIOLA 2 C IR CONTENTS DEUTSCH 3 32 ENGLISH 33 62...
Page 33: ...64...
