TechniSat TECHNIVISION HD24A, Instruction Manual

Page: 54 / 131

English - 7 -
Antenna Connection
Connect the aerial or cable TV plug to the aerial input
(ANT) socket or satellite plug to the satellite input (LNB)
socket located on the rear side of the TV.
Rear side of the TV
1
2
LNB
ANT
1. Satellite
2. Aerial or cable
If you want to connect a device to the TV, make
sure that both the TV and the device are turned off
before making any connection. After the connection
is done, you can turn on the units and use them.
License Notification
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator,
Inc.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
YouTube and the YouTube logo are trademarks of
Google Inc.
This product contains technology subject to certain
intellectual property rights of Microsoft. Use or
distribution of this technology outside of this product
is prohibited without the appropriate license(s) from
Microsoft.
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual property,
including copyrighted content. This device uses
PlayReady technology to access PlayReady-protected
content and/or WMDRM-protected content. If the
device fails to properly enforce restrictions on content
usage, content owners may require Microsoft to revoke
the device’s ability to consume PlayReady-protected
content. Revocation should not affect unprotected
content or content protected by other content access
technologies. Content owners may require you to
upgrade PlayReady to access their content. If you
decline an upgrade, you will not be able to access
content that requires the upgrade.
The “CI Plus” Logo is a trademark of CI Plus LLP.
This product is protected by certain intellectual property
rights of Microsoft Corporation. Use or distribution of
such technology outside of this product is prohibited
without a license from Microsoft or an authorized
Microsoft subsidiary.
Disposal Information
[European Union]
The symbol of the crossed-out wheeled
bin shown on the product or its packaging
means that the device must not be
disposed of with other household waste
but requires separate collection. You can
dispose of the device free of charge at
your local waste return and collection
system. The addresses can be obtained
from your responsible city council or local government.
Alternatively, you can return small waste electrical and
electronic equipment (WEEE) with an edge length of
up to 25 cm free of charge to any retailer with a sales
area relating to electrical and electronic equipment
(EEE) of at least 400 m² or to a food retailer that offers
EEE at least several times a year with a total sales
area of 800 m². Larger WEEE can be returned to a
respective retailer free of charge when buying a new
product of the same type. Regarding the modalities of
the collection of WEEE in case of shipment of the newly
bought product, please contact your retailer.
If possible, please remove all batteries and accumula-
tors as well as all removable lamps before disposing
of the device.
Please note that you are responsible for deleting all
personal data on the device to be disposed of.
[Business users]
If you wish to dispose of this product, please contact
your supplier and check the terms and conditions of
the purchase contract.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
Contact your local authority to learn about disposal
and recycling.
The product and packaging should be taken to your
local collection point for recycling.
Some collection points accept products free of charge.
Note : The sign Pb below the symbol for batteries indicates
that this battery contains lead.