TechniSat TechniVision 22 HD, Quick Start Manual

Page: 15 / 44

15
5.3 Accepting settings / Exiting menus and functions
In some menus and functions the changes made must be accepted manually in order to
save them permanently. If this does not happen, the values that existed before leaving the
menu or the function will be reset automatically.
If an
Accept
field or the
green
function key with
Accept
is displayed in the bottom
line of the screen, you can see that the changes made must be saved manually to
be accepted.
> By highlighting
Accept
using the
right/left arrow keys
and confirming with the
OK
button or by pressing on the
green
function key
(Accept)
, the changes are
saved and you return to the next menu level up.
Alternatively:
> Press the
Back
button.
A request appears asking whether the changes you made should be applied.
> Use the
right /left arrow keys
to highlight
Yes
or
No
and confirm with the
OK
button.
According to your selection the changes are now saved or rejected and you return to
the next menu level up.
Alternatively:
> Press the
Menu
button to leave the menu directly.
The settings that need to be saved manually will be reset in this case.
If the
green
function key with
Accept
is not displayed in the bottom line of the
screen, the changes are saved automatically when leaving the menu.
5.4 Changing a setting
You can create settings using the
arrow selection method,
the
selection list,
by
entering numbers
and by using the
virtual keyboard.
The television dictates the
method that can be used to alter a marked setting. You can see this from the following
displayed symbols:
-
Arrow selection method
(Point 5.4.1)
Arrows are shown on the left or right edge of the marking.
-
Selection list
(Point 5.4.2)
The symbol is shown on the right edge of the marking.
-
Entering numbers
(Point 5.4.3)
-
Virtual keyboard
(Point 5.4.4)
The symbol is shown on the right edge of the highlight.
Basic operation
EN