TechniSat Technipolar 1, Instruction Manual

Page: 42 / 160

42
The lower drain cap ( 9 ) must then be removed and the tank emptied. Let all
of the water drain into a collection vessel. When all the water has drained out
of the unit, put the cap back on. After emptying the tank, the unit will start up
again.
When operating the unit in very cold rooms, the unit is automatically
defrosted, which temporarily interrupts normal operation. Lt appears on the
display. During this process, it is normal for the sound coming from the unit
to change.
> In this mode, you may have to wait a few minutes before the unit begins to
emit hot air.
> In this mode, the fan may continue to work briefly, even though the set
temperature has already been reached.
6.5 Dehumidifier mode
The unit is ideal for reducing the room humidity (in spring and autumn, damp
rooms, rainy periods, etc.).
Note that in dehumidifier mode the moisture in the air is reduced. The
condensed water is discharged to the outside via the upper drain ( 10 ). Direct
the water into a suitable container and empty it regularly, depending on the
size of the container.
> Remove the upper drain cap (1.).
> Connect the supplied hose or a suitable hose to the connection (2) and direct
it into a suitable container.
Cap
Connect
the hose
1.
2.
> Press the MODE button ( 1 ) repeatedly until Dry ( 9 ) lights up and, at the same
time, the symbol for the automatic fan Auto ( 16 ) lights up.
In this mode, the fan speed is selected automatically by the unit and cannot
be set manually.
Be careful not to kink the condensate hose.