TechniSat TechniPad 10, Instruction Manual

Page: 6 / 96

FR
EN
PL
3.3 Important instructions
Please observe the following instructions to avoid any safety hazards, to prevent damage to
the device and to help protect the environment.
3.3.1 Safety
For your own protection, read the safety notes carefully before using your new device.
The manufacturer accepts no liability for damage caused by inappropriate handling, or by
non-compliance with the safety precautions.
Never open the device!
Touching parts that conduct high voltages can be fatal!
Any necessary repairs to the receiver should only be carried out by qualified personnel.
Only operate the receiver in a temperate climate.
Do not switch on immediately after transporting the device in the cold for a lengthy period
and then bringing it into a warm environment; wait until device reaches room tempera-
ture.
Do not expose the set to dripping or sprayed water. If water gets into the device, switch
it off and contact the service department.
Never warm up the device artificially by using heat sources to heat it up in addition to
normal use.
In the event of a thunderstorm, disconnect the tablet from the power supply unit and re-
move this from the socket. Overvoltage can damage the device.
In the event of an obvious fault with the device, emanation of noise or smoke, major
malfunctions, damage to the housing as well as liquid getting into the device, switch off
the device immediately and contact the service department.
6