5
A2DP
(Advanced Audio Distribution profile)
The A2DP enables the transmission of Stereo-audio signals in higher
quality than HDP and HFP.
AVRCP
Audio/Video Remote Control profile
AVRCP is used to send instructions (e.g. rewind, Pause/play) from an
operational device (e.g: Headset) to a certain device (e.g.: media player).
Bluetooth-profiles do only work if they are supported by the connected device (mobile
phone, media player) More information can be found in the manual of the correspond-
ing device.
3.6 General information on the battery
The
StereoManBT
has a integrated rechargeable battery.
For the first use of the device the battery should be once charged completely.
Please proceed as follows:
Please use the attached USB cable.
-
Connect one end of the USB connection with your computer.
-
Connect the other end to the
-
StereoManBT
(see Point 2: picture, Pos. 8).
The LED shows the current status:
Red LED is on: Battery will be charged.
-
Blue LED is on: Charging is finished.
-
if the power is nearly empty, you can hear an adviser sound three times from
the head phone. In this case please connect the
StereoManBT
as described
above to recharge the headset.
Operation
3.
Switch on – and off
3.1.
To switch on please press the
>
multi-function-button (MFT)
for 3 seconds. (see
point 2: picture, Pos. 8)
The blue LED is on for 1 second and starts blinking then.
To switch off press the
>
MFT button again for 3 seconds
.
The red LED glows for 1 second and stays out then.
>
To save energy, the headset switches off automatically after 5 minutes in case it is
not connected to another device.
