Automatic Location of Satellites
1. Choose the option “Auto location” on the System Menu.
The use of this function requires that ASTRA has already been
stored and that a TechniSat actuator is connected to the St
6002 S. Note only satellites with a comparatively strong signal
can be stored by this method.
2. Start with Eutelsat 16 E. Press the
buttons until this
satellite appears in the display. Then press ENTER and con-
firm by pressing ENTER again. If the satellite is stored suc-
cessfully the following message is displayed for about 3 seconds:
“Satellite peaked ... dish position stored”
TechniSat ST 6002 S
17
E N T E R
E N T E R
E N T E R
Summary of Contents for ST 6002 S
Page 35: ...TechniSat ST 6002 S 36 ENTER...
