![background image](http://html1.mh-extra.com/html/technisat/imeteo-q1/imeteo-q1_user-manual_1069679028.webp)
28
If no settings are made within 20 seconds, the unit automatically returns to
normal operation mode.
4.4 Backlight settings
While the power supply is connected
-
When the base is powered by the power adapter and the weather station is
properly placed in the power position the backlight will always be on. Press
the
(SNOOZE/BACKLIGHT)
button to adjust the backlight brightness level.
While the power supply is disconnected
-
When the weather station leaves the base and is running on battery power,
press the
(SNOOZE/BACKLIGHT)
button once and the backlight will be on for
15 seconds.
4.5 Changing the temperature unit
-
Press the
(UP)
button to switch the temperature unit in oC or oF.
4.6 Radio transmission procedure
-
The weather station will automatically start receiving transmission from the
remote sensor when the battery is inserted.
-
The remote sensor will automatically transmit temperature and humidity
signals to the weather station when the battery is inserted.
-
If the weather station does not receive a transmission from the remote sensor
(the display will indicate "- -.-"), press and hold the CH button for 2 seconds
to receive the transmission manually, the RF icon on the LCD should start
flashing.
-
When the weather station is receiving signals from two or three sensors,
press the (CH) button to read data from sensor CH2 and CH3, or set the cyclic
display option.
5 Minimum and maximum values
When the indoor/outdoor temperature and humidity are displayed on the LCD, the
weather station also records the maximum and minimum temperature and humidity
values.
-
Press the
(MEM)
button, the LCD will display the maximum temperature and
humidity value, if you press the
(MEM)
button again the LCD will display the
minimum temperature and humidity value. At the same time, the LCD will
display "MAX" or "MIN".
-
The day memory value will automatically clear at 0:00 each night.
If the temperature reading is below the range, the display will show "LL.L". If
the temperature reading is above the range, the display will show "HH.H"
Summary of Contents for IMETEO Q1
Page 17: ...17...