background image

 

Outdoor temperature sensor 

 

World Time Center 

• 

Remote transmission of outdoor temperature via 433MHz to base World Time Center. 

• 

LCD display showing current outdoor temperature in Fahrenheit (ºF) 

• 

Shower proof casing 

 

• 

Wall mounting case 

Introduction 

 

 

Getting started

 

Congratulations on purchasing this state-of-the-art World Time Center as an example of superior design and 
engineering. Providing radio controlled time, indoor temperature and humidity displays, outdoor temperature, this unit will 
never keep you guessing on time, date or current and future weather conditions. Operation of this product is simple and 
straightforward. By reading this operating manual, the user will however receive a better understanding of the WorldTime 
Center together with the optimum benefit of all its features. 

 
Remove all parts from the packaging and place onto a table in front of you. Ensure that the following parts are included: 
 
1. 

World Time Center (main unit) 

2. 

Outdoor temperature sensor 

 

3. Instruction 

manual 

World Time Center 

 

 

If any one of the above mentioned parts is missing please contact your supplier. 

          

 

 

 

 

 

Hanging 

Hole  

Please follow all further explanations and descriptions in this manual in order to ensure that your World Time 
Center and Outdoor temperature sensor work correctly. 

  

 
Important Note: 
For all users wanting to get additional informations on the function of the World Time Center there is an 
alphabetically sorted subject index at the end of this manual offering a number of technical and functional 
explanations. For use and operation of this product however the knowledge of this index is not necessary. 
 
Putting into Operation 

 

 

 

Basic Setup

 

LCD display 

Holder 

 

 
 
 
 
Outdoor t

emperature sensor

 

 
 

 
 

 

 

1. 

Open the battery cover of the World Time Center and - checking the correct polarities –  

 

insert 3 x AA, IEC LR6

 

1.5V batteries into the battery compartment as indicated above and replace the cover. 

Battery cover 

LCD2 

LCD3 

LCD1 

SET-Key 

 WORLDTIME-Key 

TIMEZONE-Key

+

 -Key

 

HYGRO-Key

 

Keys are on back for:  
WS-7097U 
WS-7092U

LANGUAGE-Key

 

Battery 
Compartment 

Battery Cover 

 

 

 

 

 

Battery cover 

Battery 
compartment

 

Features 

 

 

 

World Time Center 

 

 

 

• 

4 digits showing Hour and Minute in the main display 

 
 

• 

WWVB time signal radio-controlled clock with manual time display 

 

• 

12/24 hour display  

 

• 

Time zone selectable 

 

• 

World time display with specific place represented by 3 sucessive characters 

 

• 

Calendar display 

 

• 

Display of weekday (8 languages to choose from) 

 

• 

Display of current indoor temperature 

2. 

Unscrew the screw on the back of the Outdoor temperature sensor compartment and remove the cover. 

• 

Display of current indoor relative humidity 

3. 

Insert the 2 x AAA, IEC LR3, 1.5V batteries observing correct polarity. 

• 

Three weather icons for weather forecasting 

4. 

Replace battery cover on unit and seal by re-screwing 

• 

Weather tendency indicators  

5. 

When replacing the battery covers, ensure that the batteries do not spring free from the contacts. 

• 

°C or °F temperature display selectable 

6. 

Your World Time Center and Outdoor temperature sensor are now operational. 

• 

LCD contrast changeable to 8 different tones 

 

• 

Low battery indicator 

 

• 

Wall Mounting 

Reset 

 

Summary of Contents for WS-7097U








Reviews: