TechniSat DIGITRADIO 370 CD IR, Manual

Page: 82 / 172

82
[Update from NET] (Update via Internet radio only)
[No Update] (Time/date must be entered manually, see Section 16.4.1).
> Press the
ENTER
button to save the setting.
If you have selected [Update from NET] , you must also configure the time
zone and the summer/winter time setting. This is done under [System
Settings] > [Time and Date] > [Set Time Zone] and [System Settings]
>[Time and Date] > [Summer time?] .
16.4.3 Setting the time format
Under Time format you can activate the 12 or 24 hour format.
> Press the MENU button and use the

/

buttons to select the [System
Settings] > [Time and Date] > [Time Format] item, then press ENTER .
> Use

/

to choose one of the following options:
[24 hours]
[12 hours]
> Press the ENTER button to save.
16.4.4 Standby clock
Here you can configure the time display in standby mode. You can choose between
the analogue display or the digital display.
>
Press the MENU button and use the

/

buttons to select the [System
Settings] > [Time and Date] > [Standby Clock] item, then press ENTER .
> Use

/

to choose one of the options.
> Press the ENTER button to save.
16.5 Auto Standby
The DIGITRADIO 370/371 CD IR can automatically switch to standby mode after not
being used for a specified time.
>
Press the MENU button and use the

/

buttons to select the [System
Settings] > [Auto Standby] item, then press ENTER .
> Use

/

to select a time after which the device should switch to standby.
> Press the ENTER button to save.
In Bluetooth, CD, AUX and USB modes, the device will automatically switch to
standby mode after approx. 15 minutes if no sound is played.