123
DE
EN
13.4.1 Mute function
>
By pressing the
MUTE
key the sound is switched off or, if pressed again,
switched back on.
Throughout the time that the volume is switched to mute, the
Symbol is displayed at the top right-hand edge of the screen.
13.5 Teletext (ISI mode)
Your receiver can display teletext information on channels that broadcast teletext
data.
13.5.1 Switching on Teletext
>
Switch the Teletext on by pressing the
TEXT
key.
13.5.2 Page selection
>
Use the
numeric keypad keys 0
to
9
to enter the 3-digit page number of
the teletext page you want.
Your entry will be displayed in the upper left-hand corner of the screen.
As the Teletext pages cannot all be transmitted by the broadcaster at the
same time, it may take a few seconds before the page is displayed. This
is the case when the requested page cannot be instantly read into the
memory, e.g. when using the Teletext search immediately after the channel is
changed.
13.5.3 Teletext subpages
If Teletext subpages exist for a selected Teletext page, the already loaded
subpages are indicated to the left, alongside the Teletext display. As soon as a new
subpage is available, this is automatically displayed.
>
In order to show a sub-page, press the
OK
key.
The column at the left-hand edge of the screen becomes active. The sub-
pages that have already been acquired are displayed.
>
Use the
up/down arrow keys
to select the desired sub-page.
>
You can exit the display of specific sub-pages by pressing
OK
.
Digit S3 DVR_V2.indd 123
Digit S3 DVR_V2.indd 123
23/02/2022 08:53
23/02/2022 08:53
